Pneumatic ARB 300psi Locker Actuation Kit
Product Description
This is the ultimate in simplicity! Dump that electronic ARB kit that comes with your new locker and install this system. No need for a compressor! All pneumatically controlled! No electronics! Just open the tank and fire away!
The latest news from ARB is that they are now recommending 200-300 PSI air pressure to actuate ARB lockers for competition or competition-like use. Powertank's new PRO Series air system is for ARB air lockers requiring higher pressures as recommended by ARB during "crash locking" or engagement under heavy loads. In other words, you are getting it with your pedal mashed and your 40s are slipping so you hit the ARB switch. That can be considered heavy load.
The higher air pressure ensures a full tooth engagement needed to keep the locker from breaking. Even at 250 PSI one (1) 20 oz. tank can provide hundreds of actuations. A second back up bottle is always there in case you need it. The mounting bracket can be mounted to a rollbar with included clamps or to a flat surface.
This is a kit that IMW is offering as a special. We have run this kit on our competition rock crawler all year long and literally have not had to change a single tank! We have run the same tank all year long!
This kit comes with the following: Jet Pak 3 Package - 20 oz. CO2 Bottles (2), Sidearm PRO Regulator (REG-4012P *300psi), Aluminum Bracket, Safety Release Valve up to 300psi, Padded Bottle Bag, Necessary Fittings, Pneumatic Switch(s) for either one or two axle setup.
The latest news from ARB is that they are now recommending 200-300 PSI air pressure to actuate ARB lockers for competition or competition-like use. Powertank's new PRO Series air system is for ARB air lockers requiring higher pressures as recommended by ARB during "crash locking" or engagement under heavy loads. In other words, you are getting it with your pedal mashed and your 40s are slipping so you hit the ARB switch. That can be considered heavy load.
The higher air pressure ensures a full tooth engagement needed to keep the locker from breaking. Even at 250 PSI one (1) 20 oz. tank can provide hundreds of actuations. A second back up bottle is always there in case you need it. The mounting bracket can be mounted to a rollbar with included clamps or to a flat surface.
This is a kit that IMW is offering as a special. We have run this kit on our competition rock crawler all year long and literally have not had to change a single tank! We have run the same tank all year long!
This kit comes with the following: Jet Pak 3 Package - 20 oz. CO2 Bottles (2), Sidearm PRO Regulator (REG-4012P *300psi), Aluminum Bracket, Safety Release Valve up to 300psi, Padded Bottle Bag, Necessary Fittings, Pneumatic Switch(s) for either one or two axle setup.
